introduction

In recent years, with the popularization of the concept of healthy eating, fully Automatic oil presses have become increasingly popular in home and commercial kitchens. However, many people often face problems with oil quality and oil extraction efficiency when using fully automatic oil presses. This article will start from the problem and provide practical solutions to help users give full play to the advantages of fully automatic oil presses.

Problem 1: Oil quality is not up to standard

When many users use fully automatic oil presses, the oil they get often has unsatisfactory taste and quality. The problem usually lies in the following aspects:

• Improper selection of raw materials
• Oil pressing temperature control is unreasonable
• The oil press is not properly cleaned

solution

In order to improve the quality of oil products, users need to pay attention to the following points:

1. Choose high-quality raw materials: Using fresh, mature oil crops (such as peanuts, soybeans, etc.) can significantly improve the taste and nutritional content of the final oil.
2. Control the temperature of oil extraction: Ensure that the oil press operates within a suitable temperature range, generally 40-50 degrees Celsius is ideal. Excessive temperature will affect the nutritional content of oil.
3. Clean the machine regularly: ensuring that all parts of the oil press are clean can prevent cross-contamination of oil.

Problem 2: Low oil extraction efficiency

Another common problem is low oil extraction efficiency, which is usually caused by the following factors:

• The oil press parameter settings are unreasonable
• Improper operation leads to waste of raw materials
• Uneven machine load usage

solution

With the goal of improving oil extraction efficiency, the following suggestions can be considered:

1. Properly set the parameters of the oil press: adjust the speed and pressure of the oil press according to the type of raw materials to obtain the best oil extraction effect.
2. Standardize operating procedures: Ensure operators are familiar with operating essentials and reduce unnecessary waste.
3. Evenly distribute raw materials: Reasonably distribute raw materials into the oil press to avoid overload conditions.

in conclusion

By mastering the usage skills of the fully automatic oil press, users can not only improve the quality of oil products, but also effectively improve the efficiency of oil extraction. These tips will help you have a better oil extraction experience at home or in a commercial setting to support your healthy diet.