How to operate the multifunctional spiral hot and cold oil press

introduction

The multifunctional spiral hot and cold oil press is an indispensable part of modern Oil Pressing Equipment. Its flexible operation mode and superior oil pressing quality are widely welcomed. However, how to use this equipment effectively and safely is still a challenge faced by many users. This article will provide users with a detailed operation guide to help you give full play to the functions of this equipment.

Problem: Difficulties in operating the multifunctional spiral hot and cold oil press

When operating the multifunctional screw hot and cold oil press, users may encounter the following difficulties:

• Improper preparation of raw materials will affect the oil extraction effect.
• Improper machine parameter settings lead to low oil pressing efficiency.
• Improper cleaning and maintenance after oil pressing may lead to equipment failure.

Solution

1. Raw material preparation

Before oil extraction, you must first prepare the right raw materials. Make sure to use fresh, high-quality oil crops, such as soybeans, peanuts, etc., and avoid using damp or moldy raw materials. This is the first step to ensure the quality of the oil.

2. Set machine parameters

Before turning on the equipment, please select the appropriate machine parameters according to your raw materials. Generally speaking, the choice of hot or cold pressing will affect the flavor and nutritional content of the oil.

Steps:

1. Choose cold pressing or hot pressing according to the type of raw materials.
2. Set the oil pressing temperature and pressure to ensure the equipment operates normally.

3. Cleaning and maintenance

After the oil pressing is completed, cleaning the equipment is a very important step. Timely cleaning can effectively prevent the equipment from rusting and oil stains from accumulating.

Cleaning steps:

1. Disconnect the power supply and wait for the device to cool down completely.
2. Use clean water and an appropriate cleaning agent to disassemble and clean the parts.
3. Finally, assemble the device back into place and dry all parts.

Common Problems and Solutions

In actual operation, users may encounter the following problems:

• Insufficient oil extraction: Check the quality of raw materials and equipment settings to ensure uniform feeding.
• Abnormal equipment noise: Check whether the machine parts are loose or worn.
• Abnormal oil color: Pay attention to the temperature control of raw materials and oil pressing process.

Conclusion

By mastering the above operating skills, using the multifunctional spiral hot and cold oil press will become easier and more efficient. At the same time, regular equipment maintenance and cleaning are also the key to ensure the long-term stable operation of the equipment. I hope this article can provide you with practical guidance in the oil pressing process and enhance your experience.