Introduction

This special report will give you a detailed introduction on how to operate the multifunctional screw hot and cold oil press, including the basic structure of the equipment, operation steps, maintenance and solutions to common problems. Through this article, we hope to help users better master the skills of using the equipment and improve production efficiency and product quality.

The basic structure of the multifunctional spiral cold and hot oil press

The multifunctional spiral hot and cold oil press consists of a main machine, a pressing chamber, a spiral shaft, a heating system and a control panel. This design enables the equipment to perform both hot and cold pressing operations and is suitable for the pressing of a variety of oil crops.

Procedure

1. Preparation

• Check whether all parts of the device are intact and whether the power cord is plugged in securely.
• Set the temperature according to the instructions and wait for the device to preheat.

2. Add ingredients

Slowly pour the prepared oil into the hopper, ensuring even addition to avoid blockage.

3. Start the device

Press the start button, the equipment starts running, and observe the oil pressing process. Make sure the oil outlet is unobstructed and the oil is free of impurities.

4. Collect oil

When the oil flows out, use an oil collection container to catch the oil and filter it in time.

5. Stop the device

After the oil pressing is completed, stop adding materials first, then press the stop button, disconnect the power supply, and wait for the equipment to cool down.

Maintenance

Daily maintenance and regular care of equipment are the key to ensuring its normal operation and extending its service life. Here are some maintenance suggestions:

• Clean the machine body and components regularly to ensure that there is no residue clogging.
• Check the wear of the screw shaft and press chamber, and replace damaged parts in time.
• Check the power system regularly to ensure stable power supply.
• After each use, clean the device thoroughly to avoid oil buildup.

Common Problems and Solutions

Professional advice and experience sharing

Different oils have different extraction methods. It is recommended that users choose the appropriate operating temperature and feeding speed according to the specific oil. In addition, regular participation in equipment operation training and exchanges can gain more valuable practical experience and skills.

Summarize

Through the introduction of this article, I believe that users have mastered the operation methods and daily maintenance skills of the multifunctional spiral hot and cold oil press. I hope these contents can help you improve production efficiency and product quality. If you have any other questions, please feel free to contact us.